Exterior Wood Opening Storm Windows
Technical Data
Frame
Constructed of clear quarter sawn Douglas Fir
3/4" thick by 2" wide
Ogee pattern on outside face
Kiln dried to 8-9% moisture content
Mitered dovetail corner construction (glued and screwed)
Eight G.R.P.I. minimum
+ or - 1/16" size tolerances

       Unfinished
Clear exterior Prothane
White "Z" prime
Painted (Parker Paint custom color matching to your paint sample)

Available Finishes
3/8" vinyl "O" bulb, saw kerf style
Weatherstripping
Glass
Tinted Glass (heat gain reduction)
Laminated Safety (sound control)
Obscure (privacy)
Low-E (enhanced energy savings)
Tempered (safety)
Most glass can be upgraded to 3/16" upon request
A variety of Acrylic types are also offered
Exterior Wood Picture Style Storm Windows
This style is non-opening
Same specifications as opening style, except the frame dimension is 3/4" thick by 1-1/2" wide.  Weatherstripping is 1/8" x 3/8" closed cell tape.
Aluminum Picture Storm Windows
Air-Tite Storm Window's picture windows are composed of a main frame with a removable sash.  Picture windows are available as a single one lite or can be split into two or three lites either vertically or horizontally.  Interchangeable screens can also be ordered as an option.

The main frame of the window is weather stripped with a nylon pile and comes with a pre-applied closed cell foam tape on the mounting flange for ease of installation.

The removable sash is a tuck and drop design with a clip on each side.  To remove the sash for cleaning, simply loosen the clips on the sides and lift the panel up and out.

The glass is glazed into the sash via a marine wrap-around glazing boot.  A wide variety of glass or acrylic options are available.

The main frame and internal sash are made of extruded aluminum 6063 T-5 with a typical wall thickness of .060.  The aluminum finishes are available in clear anodized, bronze anodized and white enamel.  Plain mill finish is not offered.

The corners are mechanically fastened using stainless steel screws.  The meeting rails are an inter-lock design, complete with nylon pile weather stripping.  A bottom expander placed on the main frame is optional at no extra charge to accommodate an out-of-square opening and/or bevel sills.

Air-Tite's aluminum sliding storm windows are a spring tension designed window.  All configurations (vertical and horizontal sliding) are manufactured using the same main frame and sash parts.  Spring placement is the major difference in determining vertical versus horizontal sliding capabilities.

A technologically advanced spring tension design allows the windows to be held open in virtually any position, and the removal of the sash for cleaning is as simple as compressing the sash against the spring loaded track and lifting it out.  As a fail safe, vertical sliding windows have a notched jamb to accommodate oversized windows as well as heavier sound control designs.

The glass is glazed in the sash via a marine wrap-around glazing boot.  A wide variety of glass options are available.

Standard screening is 16 x 18 mesh charcoal color fiberglass.  Many optional screen materials are available, such as copper, brass, stainless steel, bright or charcoal aluminum.

For ease of installation, the main frame of the window comes with 1/8 inch x 3/8 inch closed cell foam tape pre-applied to the nail fin of the frame.

The main frame and internal sash are made of extruded aluminum 6063 T-5 with a typical wall thickness of .060.  The aluminum finishes are available in clear anodized, bronze anodized, and white enamel.  Plain mill finish is not offered.

The corners are mechanically fastened using stainless steel screws. The meeting rails are an inter-lock design, complete with nylon pile weather stripping.  A bottom expander, placed on the main frame, is optional at no extra charge to accommodate an out-of-square opening and/or bevel sill.
Aluminum Sliding Storm Windows
Interior Wood Storm Windows
Frame
Wood:  Beautiful hand selected, precision-milled woods.  Available in your choice of traditional red oak or hem-fir.  Choose from a variety of stains to complement your room.  Other hardwoods are available on order.

Mitered Corners:  Precision-mitered and joined in a self-aligning and rigid manner.               Fastened with screw connectors for maximum strength and stability.

       Weatherstripping:  Quality Fin-Seal weatherstripping between meeting rails creates a         positive double-seal air, dust, and moisture-infiltration barrier.

        Finish:  Your choice of Spanish Oak, Gunstock, Clear Gloss, and Natural                          (unfinished).  Stains are sealed with an exterior prothane clear gloss coat with                    ultraviolet inhibitors which lock in the natural beauty of the finish.

       Vinyl Track:  Precision extruded vinyl, self lubricating for free-and-easy glide.                       Available in almond or bronze colors.

       Weatherstripping:  Fitted with special high quality double-perimeter weatherstripping            to provide a positive air, dust, and moisture-infiltration barrier around the entire                     window.

Track
Air-Tite's Unique Air-Loc System
   Exclusive feature ensures optimum effective control of air, dust,          and moisture-infiltration around the window.

Glazing
Glass:  Top quality 1/8" float glass standard (various coated and tinted glass available).
Glazing Vinyl:  Marine-grade, unitized, cushioned "U-channel" glazing vinyl.  Wraps around pane and allows for expansion and contraction due to temperature variances.
Windows approved to meet or exceed all ANSI/AAMA 1002.10 HWI specifications through independent laboratory testing,
Tested and Approved
Air-Tite Storm Windows
Air-Tite Storm Windows
A Division of Tesco Products Corporation
4625 Chennault Beach Road |  Mukilteo, WA  98275
     
Phone: 800-722-4424  |  Fax: 888-329-4545
Email Us At:  airtitestormwindows@msn.com
Glazing type:  unitized cushion glazing with marine vinyl boot
Standard glazing:  1/8" clear annealed float
Optional glazing: